GB
20
The motion detector is factory-configured
for deterrence (see your control panel
installation guide for system responses).
The alarm level can be changed by resetting
the parameters as shown opposite.
Parameter-setting sequence
Programming
LED off
Programming
LED on
Programming
sequence
about
5 s.
about 10 s.
about 2 s.
about 10 s.
To start
,
press and
hold until the
LED goes out.
Press
the button
5 times
for the
parameter
number
Press and
hold
until the
LED briefly
goes out
Press
the button
1 to 4 times
for the
parameter value
To end
, press
and hold the
button until the
LED goes out
Programming
LED steadily lit
= parameter
set correctly
Start
Press
the
button 5
times
to select the
alarm level
Press
once to
create a
space
Press
the button
twice
to select the
prealarm level.
End
Parameter-setting example:
setting the
detector to prealarm level: parameter
number 5, parameter value 2.
5
2
about 2 s.
t
t
4. Parameter-setting
{
{
Parameter N°
Alarm level
Parameter value
5
Intrusion
1
Prealarm
2
Deterrence
3 (factory setting)
Warning
4 (function compatible with control panel
versions 2.0.0 and later)
