DAITEM SH100AX, Руководство по установке

Страница: 3 / 50

213
GB
Thank you for purchasing our infra red barrier beam.
In order to carry out the installation under the best conditions, we strongly advise:
1. first reading chapter “
1. Presentation” ,
2. carefully selecting the siting of the various modules and the “type of protection” described in this Installation Manual,
3. strictly follow the chronological order of the successive procedures,
4. create a drawing of the site with a key indicating the position of the IR beams and the radio transmissters, and place a
copy with the Installation file for future maintenance reference.
Foreword
NOTE: the terms & conditions of sale are printed on our invoices, and separate copies and copies of the warranty are available
upon request.
Treatment of electrical appliances and electronic equipment at the end of product’s lifetime (Applicable in the European Union and other European
countries operating a system of collection. This symbol, on the product or its packing, indicates that this product should not be treated with domestic
waste. It must be given to a suitable collection point for the recycling of the electric and electronic components. By you ensuring that this product is cor-
rectly disposed of, this will help to prevent the negative consequences for the environment and human health. For all additional information about the recycling
of this product, contact the local community recycling centre, or the company from whom you purchased the product.
The installer recommends and carries out the installations under his only responsibility. It is his responsibility to conform to the
regulations in force, and to carry out the instructions and recommendations contained in this Installation & Instruction manual.
Possible dysfunctions of the system caused by not respecting these recommendations are the single responsibility for the installer.
Precautions:
• Do not to use this product for a use other than detection of movement such as people or vehicles.
• Do not use the product to actuate a powered roller shutter, etc, that could cause an accident.
• Do not to touch the terminals of the product with the wet hands (do not to touch the product if it wet by the rain, etc). There is a risk
of electric shock.
• Never try to disassemble or repair the product. This could cause a fire or damage the device.
• Do not to use batteries other than those specified.
• Do not mix used and unused batteries with different levels of charge. Failure to respect this precaution could cause an explosion, an
escape of electrolyte, a pollutant gas emission with potentially harmful consequences for personnel and product.
• Always take care handling any batteries as there can be serious burn, explosion,or fire hazard. Do not attempt to recharge, apply a
short circuit across their terminals, crush, or disassemble, heat to more than 100C (212F), incinerate or expose to water.
• Do not to pour water on the product from a bucket, or a pipe, etc, this could penetrate into the product and damage the
components.
• To ensure continued secure performance, clean and check the device periodically. If you encounter a problem, have the product
repaired or exchanged by qualified personnel.