DAITEM SH100AX, Руководство по установке

Страница: 19 / 50

229
GB
4.4.3 Closing the back box
If the IR beam units SH102AX or SH103AX (with built-in radio transmitters), are to be extended or stacked with slave IR beams
SH100AX or SH101AX (without built-in radio transmitters), continue the installation with chapter
“4.5 Interconnecting multiple non
radio beam sets” , if not close the case and go to chapter “5. Configuration and adjustments of infra-red detection” .
1. Hang the back box to the bottom of the base.
2. Close the box.
3. Tighten the fixing screw.
1
3
2
5. Position the base on the post with anti-tamper pin
positioned at the top then to fix it to post using the
screws and the “U” clamp (provided).
Module 1
Module 2
6. CAUTION: ensure the base is firmly and correctly fixed to the
post to ensure correct operation of the anti-tamper pin and
micro-switch.
“U” clamp Screws M4x30
Anti-tamper pin