DAITEM 155-21X, Руководство по установке

Страница: 7 / 20

99
GB
iMPoRtAnt: to be able
to thread the cables for
surface mounting,
remove the 2 fixing
spacers and insert them
between the ceiling and
the mounting base by
covering the 2 selected
fixing holes.
iMPoRtAnt: opening
will now be possible
only by means of a flat
blade screwdriver.
4.3 Fixing the detector in place
Standard fixing method
1.
Install the base in the desired location, then mark the
position of the 2 fixing holes (marked
or ) using a
pencil.
2. Drill holes using a 5 mm Ø drill bit.
3. Fix the base using appropriate plugs and screws.
Fixing with flush-mounting box
1.
For 60 mm diameter boxes: use holes marked .
2. For 85 mm diameter boxes: use holes marked .
3. Fix the base using suitable screws.
60 85
60
85
optional locking of the detector on the mounting base
Optional locking is designed to prevent unauthorized
dismounting of the detector.
Using cutting pliers, cut the locking nipple.
Locking nipple
v
Align the 2 locating arrows
marked on the mounting
base and the detector, then
lock the unit by turning
clockwise.
iMPoRtAnt: the detector
cannot be fixed to the base
if the battery is not properly
connected.
Do not use force.
Diameter 60 fixing holes
Diameter 85 fixing holes
Fixing
spacers
Test button
alignment
marker