DAITEM 155-21X, Руководство по установке

Страница: 6 / 20

98
GB
4.2 testing the radio range
at the chosen location
1. Hold down the detector programming key
0 or the test button until the built-in
sounding can be heard:
• correct: the control panel confirms the
radio link with a voice message “beep,
fire detector n° X”,
• incorrect: if there is no voice message,
move the heat detector closer to the
control panel.le.
2. Put the control panel back in user mode by
pressing:
• in rooms where the relative humidity might
rise above 95% (without condensation),
• close to heating, cooling or air vents.
Mounting examples:
Recommended
location
d > 50 cm
plafond
Fig. 1
d > 50 cm Fig. 2
iMPoRtAnt: the control panel must be in
installation mode to perform this test (see
Recognition programming).
engineer installer code