DAITEM 155-21X, Руководство по установке

Страница: 14 / 20

106
GB
v
v
8.3 During DiY work
the detector must not be
painted.
If work is to be
carried out in the room where
the detector is installed,
completely cover the
detector using the plastic
cover.
iMPoRtAnt: do not forget
to remove the plastic cover
when the work is finished.
• the lithium battery pack must be replaced by the same type of pack with the same
technical characteristics, i.e. (3.6 V - 4 Ah).
• We advise you to use the DAiteM BatLi26 pack available in the catalogue
in order to guarantee individual safety and equipment reliability.
• Dispose of the waste lithium power pack in an appropriate recycling bin.
8.2 Changing the battery
if the optional opening
of the detector is not
locked (see Fixing…)
1.
Remove the detector from
its base by turning it
counter clockwise until
you hear a click.
if the optional opening
of the detector is locked
(see Fixing…)
1.
Insert a flat blade
screwdriver into this notch.
2. Replace the worn battery.
3. Lock the detector back
onto its base (see
Fixing...).
4. Carry out a test (see
Testing the detector).
2. Remove the detector from
its base by turning it
counter clockwise until
you hear a click.
3. Replace the worn battery.
4. Lock the detector back
onto its base (see
Fixing...).
5. Carry out a test (see
Testing the detector).
Li