Daikin Super Multi NX FLKS25BAVMB, Руководство по обслуживанию, Страница: 97 / 144

SiBE05-722EE Troubleshooting
Service Diagnosis 87
4.17 High Pressure Control in Cooling
Error Code
F6
Method of Error
Detection High-pressure control (operation halt, frequency drop, etc.) is activated in cooling operation if
the temperature sensed by the outdoor heat exchanger thermistor exceeds the limit.
Error Decision
Conditions
„
The temperature sensed by the outdoor heat exchanger thermistor rises above about
65°C.
„
The error is cleared when the temperature drops below about 50 ~ 55°C.
Supposed
Causes
„
The installation space is not large enough.
„
Dirty outdoor heat exchanger
„
Defective outdoor fan motor
„
Defective stop valve
„
Defective electronic expansion valve or coil
„
Defective outdoor heat exchanger thermistor
„
Defective outdoor unit PCB
Troubleshooting
Check No.01
Refer to P.102
Check No.12
Refer to P.104
Check No.17
Refer to P.109
Check No.18
Refer to P.109
Check No.19
Refer to P.110
(R20418)
Caution
Replace the outdoor fan
motor.
Reconnect the connector or
fan motor lead wires.
Replace the stop valve.
Replace the outdoor heat
exchanger thermistor.
Replace the outdoor unit
PCB (main PCB).
Replace the electronic
expansion valve or the coil.
Replace the outdoor unit
PCB (main PCB).
Change the installation
location or direction.
Clean the outdoor heat
exchanger.
Check the installation space.
NG
OK
OK
NG
NG
OK
OK
OK
NG
NG
Check No. 19
Check the outdoor fan.
Check No. 18
Check the discharge
pressure.
Check No. 12
Check the electronic
expansion valve.
Check No. 01
Check the outdoor heat
exchanger thermistor.
Check No. 17
Check the installation
condition.
Be sure to turn off the power switch before connecting or disconnecting
connectors, or parts may be damaged.