Daikin SM-12-012, Руководство по обслуживанию

Страница: 16 / 54

Service Manual SM-Inverter_(i) 16
3. ID unit buzzer will produce a long beep if the handset error code matched with unit error.
4. A short and two consecutive beeps is Not the unit error.
5. The code display will cancel itself if the button is not pressed for 1 minute.
How to Retrieved Last State Error:
1) Remove battery from remote controller.
2) Replace battery again into remote controller.
3) Press Mode & ON/OFF buttons together.
4) The “ 00 “ will show at temperature section.
5) Press Mode button to 5:00
6) Press Power On toward the indoor unit. Unit LED blinks two times indicate received signal.
7) ON hold fan button till screen become normal display.
8) Repeat the normal step to retrieve error. (by using remote controller step. Holding TIMER CANCEL…)
9) By using this method, the error shown will be Last State Error.(Previous error in this unit)
ON/OFF
button
Mode
button