Daikin Modular Rotary, Инструкция по установке, использованию и техническому обслуживанию

Страница: 11 / 64

11
Range specifications
The MACHINE is designed and built for air treatment and can have different configurations depending on
the type of treatment requested by the customer. In this sense, the MACHINE consists of several sections,
each of them with a specific function, which may or may not be present according to the type of treat-
ment requested.
The supporting structure consists of profiles made by aluminium alloy extrusion. The fixing screws are
concealed in the profile itself so as to have smooth surfaces on the inside. The panels of the structure
consist of two zinc-plated box press-folded sheets injected with polyurethane. Alternatively, as an insu-
lator, mineral wool can be used. Where necessary, along the panels, doors with locked handles and/or
portholes are installed to inspect the inside of the machine.
Construction specifications:
- Profile type: anodised aluminium with thermal break
- Insulation panels: polyurethane or mineral wool
Base module
- Condensing or absorbing rotary recuperator, or with counterflow plates;
- Single suction EC-type centrifugal fans with integrated electronics (2 in parallel for each fan section for size 09-10);
- Pocket filters;
- Compact prefilters;
- Aluminium dampers;
- Condensate drain tank downstream of the recuperator (only for Modular-P model).
Additional modules
- In addition to the Basic Module, depending on the customer's needs, it is also possible to add optional
components:
- Mixing Module, used to vary the mixture of the supplied air;
- Attenuator in Exhaust Air;
- Attenuator in Fresh Air;
- Electric heating battery (preheating or post-heating);
- Additional rigid pocket filter;
- Hot water battery;
- Cold water battery
- As an alternative to water batteries, direct expansion batteries can be used for both heating and cooling.