Daikin MicroTech III, Руководство по устранению неисправностей

Страница: 12 / 40

OM 1085-6 • MICROTECH III CONTROLLER 12 www.DaikinApplied.com
Download and Configuration
From the Options tab:
8. Select Auto Disconnect, Readback Verify, Erase Device
Before Program, and File Over Warning ( Figure 12) .
Figure 12: Select Options
From the Options tab:
9. Select New Settings.
10. Enter M38507 from the Choose Device and Kernel
menu\Filter section type field ( Figure 13 ).
11. Select 740 – M38507F8A and click Next.
Figure 13: Select Device
From the Communications Port screen ( Figure 14 ):
12. Select E8a from the Select Port drop-down menu.
13. Check “Set Reset pin as low when disconnecting.”
14. Click Next.
Figure 14: Communications Port
From the Connection Type menu ( Figure 15 ):
15. Verify that Recommended Speeds and Use Default are
checked.
16. Click Next.
Figure 15: Connection Type
From the Programming Options menu ( Figure 16 ):
17. Select Automatic Protection and Standard Messaging.
18.
Select Yes for Readback Verification.
19. Click Finish.