Daikin MicroTech III, Руководство по устранению неисправностей, Страница: 13 / 40

Download and Configuration
www.DaikinApplied.com 13 OM 1085-6 • MICROTECH III CONTROLLER
Figure 16: Programming Options
From the Options tab ( Figure 17) :
20. Select Other Properties Settings\Auto Send ID.
Figure 17: Other Properties
From the ID Check menu ( Figure 18 ):
21. Set all the ID bytes to FF.
22. Verify Enable Automatically Verifying ID is checked.
23. Click OK.
Figure 18: ID Check
24. Select Other Properties Settings\Target Power.
25. Click “Memorize the settings in this dialog box until the
work space is closed” and then click OK ( Figure 19 ).
Figure 19: Target Power Settings
In the File Selection area ( Figure 20 ):
26. Confirm Download File and User/Data Area are both
selected.
27. Click on the right arrow then Browse to choose the
Baseboard or IO Expansion Board controller binary
software file (.mot file type). Contact the ATS Technical
Support Team at 315-282-6434 to request a copy of this
software file.
28. Click Open.
29. Click on the Program Flash button.
Figure 20: Select File for Download