Daikin MicroTech I Скачать руководство пользователя страница 42

Страница: 42 / 42

IM 1285-4 (01/22)

Daikin Applied Training and Development

Now that you have made an investment in modern, efficient Daikin equipment, its care should be a high

priority. For training information on all Daikin HVAC products, please visit us at www.DaikinApplied.com

and click on Training, or call 540-248-9646 and ask for the Training Department.

Warranty

All Daikin equipment is sold pursuant to its standard terms and conditions of sale, including Limited

Product Warranty. Consult your local Daikin Applied Representative for warranty details. To find your

local Daikin Applied Representative, go to www.DaikinApplied.com.

Aftermarket Services

To find your local parts office, visit www.DaikinApplied.com or call 800-37PARTS (800-377-2787).

To find your local service office, visit www.DaikinApplied.com or call 800-432-1342.
This document contains the most current product information as of this printing. For the most up-to-date

product information, please go to www.DaikinApplied.com.

Products manufactured in an ISO Certified Facility.

Содержание MicroTech I











































Результаты поиска

Содержание MicroTech I

Отзывы:

Бренды по названию

Популярные бренды

Daikin MicroTech I, Руководство по установке и обслуживанию

Результаты поиска

Содержание MicroTech I

Отзывы:

Бренды по названию

Популярные бренды