Operation Manual
SiBE81-909
46
Humidifying Air Purifier
37
Care & Cleaning
(About every 2 years [2 seasons])
1
Remove the front panel and water tank.
5
Restore the shaft as before.
2
Pull out the humidifying tray and remove the
waterwheel and humidifying filter.
3
Remove the shaft that locks the humidifying filter
and waterwheel.
6
Restore the humidifying tray.
7
Restore the water tank and front panel.
4
Remove the humidifying filter from the
waterwheel, and attach a new filter.
8
9
Plug the power supply cord in.
Press and hold the humidifying filter
reset button at the top of the unit for 2
seconds.
(A short beep sound is emitted and the
humidifying filter lamp goes out.)
• After replacing the humidifying filter, the
humidifying filter lamp does not go out
unless the filter reset button is pressed
and held for 2 seconds.
• Tuck the humidifying filter underneath the tabs (6
locations) on the waterwheel so that it does not
stick out from the waterwheel.
• For replacement humidifying filters, contact the service shop. (See the ATTENTION on page 38.)
• Dispose of used humidifying filters as noncombustible waste. (Material: Polyester, rayon)
REPLACE
HUM
RESET
(Push for 2 sec.)
RESET
(Push for 2 sec.)
If the humidifying filter lamp lights or flashes
X
Page 29.
Turn the shaft to
the right.
Restore the shaft.
X
Page 35.
Turn the shaft to
the left.
Pull the shaft out.
X
Page 36.
X
Page 29.
Humidifying filter
Waterwheel
Do not discard the waterwheel.
HUM
RESET
(Push for 2 sec.)
RESET
(Push for 2 sec.)
Tuck the filter
under the tabs
to hold it in
place.
Tab
Humidifying filter replacement
WARNING
• Before performing maintenance, stop the unit and
unplug the power supply cord.
Using the unit without replacing
the humidifying filter causes
mildew, foul odors and
humidification loss.
Replace
Humidifying filter replacement
Содержание MCK75JVM-K
Страница 1: ...SiBE81 909 Humidifying Air Purifier...