background image

Table of contents

Installation manual

5

FWE03~11D
Fan coil units
3P443944-5P – 2021.12

Table of contents

1 About the documentation

5

1.1

About this document..................................................................

5

1.2

Meaning of warnings and symbols ............................................

5

1.3

General......................................................................................

5

2 About the box

6

2.1

Overview: About the box ...........................................................

6

2.2

To unpack and handle the fan coil unit......................................

6

2.3

To remove the accessories from the fan coil unit......................

6

3 About the unit

6

3.1

Overview: About the units and options......................................

6

3.2

Identification ..............................................................................

6

3.2.1

Identification label: Fan coil unit..................................

7

4 Preparation

7

4.1

Overview: Preparation ...............................................................

7

4.2

Preparing the installation site ....................................................

7

4.3

Preparing water piping ..............................................................

9

4.4

Preparing electrical wiring .........................................................

9

4.4.1

About preparing the electrical wiring...........................

9

5 Installation

9

5.1

Mounting the fan coil unit ..........................................................

9

5.1.1

Horizontal installation.................................................. 10

5.1.2

Vertical installation ...................................................... 10

5.1.3

Wall mounted type ...................................................... 13

5.2

Connecting water piping ............................................................

14

5.2.1

To connect the water piping........................................ 14

5.2.2

To fill the water circuit ................................................. 15

5.2.3

Installation of the valve kits ......................................... 15

5.3

Connecting the electrical wiring.................................................

20

5.3.1

About connecting the electrical wiring......................... 20

5.3.2

Guidelines when connecting the electrical wiring ....... 20

5.3.3

To connect the electrical wiring to the fan coil unit ..... 20

5.3.4

To change the electrical wiring direction..................... 21

5.4

Connecting the drain piping.......................................................

22

5.4.1

To install the drain piping to the unit ........................... 22

5.4.2

To check the drain piping............................................ 22

6 Commissioning

23

6.1

To perform a test run .................................................................

23

6.2

Checklist before commissioning ................................................

23

7 Maintenance and service

23

7.1

To clean the air filter ..................................................................

23

8 Disposal

26

9 Technical data

26

9.1

Information requirements for fan coil units ................................

26

9.2

Dimensions................................................................................

26

9.3

Wiring diagram ..........................................................................

30

1

About the documentation

1.1

About this document

Target audience

Authorised installers

INFORMATION

This appliance is intended to be used by expert or trained
users  in  shops,  in  light  industry,  and  on  farms,  or  for
commercial and household use by lay persons.

Documentation set

This  document  is  part  of  a  documentation  set.  The  complete  set
consists of:

Fan coil unit installation manual:

▪ Installation instructions

▪ Format: Paper (in the box of the fan coil unit)

Latest revisions of the supplied documentation may be available on
the regional Daikin website or via your dealer.

The original documentation is written in English. All other languages
are translations.

Scope of the manual

This  manual  describes  the  procedures  for  handling,  installing  and
connecting  the  unit.  This  manual  has  been  prepared  to  ensure
adequate  maintenance  of  the  unit,  and  it  will  provide  help  in  case
problems occur.

1.2

Meaning of warnings and symbols

DANGER

Indicates a situation that results in death or serious injury.

DANGER: RISK OF ELECTROCUTION

Indicates a situation that could result in electrocution.

DANGER: RISK OF BURNING/SCALDING

Indicates  a  situation  that  could  result  in  burning/scalding
because of extreme hot or cold temperatures.

WARNING

Indicates  a  situation  that  could  result  in  death  or  serious
injury.

CAUTION

Indicates a situation that could result in minor or moderate
injury.

NOTICE

Indicates  a  situation  that  could  result  in  equipment  or
property damage.

INFORMATION

Indicates useful tips or additional information.

Symbols used on the unit:

Symbol

Explanation

Before installation, read the installation and
operation manual, and the wiring instruction sheet.

Before performing maintenance and service tasks,
read the service manual.

For more information, see the installer and user
reference guide.

1.3

General

If  you  are  NOT  sure  how  to  install  or  operate  the  unit,  contact  your
dealer.

WARNING

Improper  installation  or  attachment  of  equipment  or
accessories  could  result  in  electrical  shock,  short-circuit,
leaks,  fire  or  other  damage  to  the  equipment.  ONLY  use
accessories,  optional  equipment  and  spare  parts  made  or
approved by Daikin.

Содержание FWE03D Series

































Отзывы: