5 Installation
Installation manual
11
FWE03~11D
Fan coil units
3P443944-5P – 2021.12
a
a
b
b
2
Mount high-standing installation legs (d) with screws (c)
(included in option kit).
d
d
c
c
3
Adjust the unit to the correct position for installing.
1/100
4
Check if the unit is horizontally levelled. Do NOT install the unit
tilted. If the unit is tilted against the direction of the condensate
flow (drain piping side raised), it will cause water to drip. Check
if the unit is levelled at all 4 corners with a water level (a) or a
water-filled plastic tube (b).
b
a
Floor–standing type (ESFH01D5)
In case of floor standing installation, please follow the instruction as
shown below.
1
Remove the air filter.
2
Remove the service cover (c) and air filter (a) from the unit.
a
c
3
Insert the rubber support (b) (included in the option kit) in the
free area between the side plate and the bottom flanges.
4
Reattach the removed service cover (c) to the bottom side.
5
Attach 2 installation legs (d) from the vertical installation option
kit to the service cover with the 4 screws (e) from the option kit.
6
Reattach the air filter (a) on the service cover filter guide.
7
The unit is ready for vertical installation.
Содержание FWE03D Series
Страница 31: ......