31
Care and Cleaning
Take off the titanium
1.
apatite photocatalytic air-
purifying
fi
lters.
Open the upper front panel and pull out the air
fi
lters.
•
Hold the recessed parts of the frame and unhook
•
the 4 claws.
Claw
Clean or replace the titanium
2.
apatite photocatalytic air-
purifying
fi
lters.
[Cleaning]
Vacuum dust, and soak in lukewarm
2-1
water or water for about 10 to
15 minutes if very dirty.
Do not remove the
fi
lter from the frame when
•
washing with water.
After washing, shake off remaining
2-2
water and let them dry in the shade.
Do not wring out the
fi
lter to remove water from it.
•
[Replacement]
Remove the
fi
lter from the
fi
lter
frame and attach a new one.
Do not throw away the
fi
lter frame. Reuse the
•
fi
lter frame when replacing the titanium apatite
photocatalytic air-purifying
fi
lter.
When attaching the
fi
lter, check that the
fi
lter is
•
properly set in the tabs.
Tabs
Dispose of the old
fi
lter as non-
fl
ammable waste.
•
Set the
fi
lters as they were and
3.
close the upper front panel.
Return the panel support plate to its previous position.
•
Lower the lower front panel to the original position.
•
Close the upper front panel slowly.
•
Press the upper front panel at both sides.
•
NOTE
Operation with dirty
fi
lters:
•
cannot deodorise the air,
–
cannot clean the air,
–
results in poor heating or cooling,
–
may cause odour.
–
Dispose of old
fi
lters as non-
fl
ammable waste.
•
To order titanium apatite photocatalytic air-purifying
•
fi
lter, contact the dealer where you bought the air
conditioner.
Item
Titanium apatite photocatalytic
air-purifying
fi
lter (without frame) 1 set
Part No.
KAF970A46
Titanium apatite photocatalytic air-purifying
fi
lter
01_EN_3P369488-1.indd 31
01_EN_3P369488-1.indd 31
6/11/2014 10:59:29 AM
6/11/2014 10:59:29 AM
