11
AUTO · DRY · COOL · HEAT ·
FAN Operation
The air conditioner operates with the operation mode of your choice.
From the next time on, the air conditioner will operate with the same operation
mode.
To start operation
Press
1.
and select an operation mode.
Each pressing of the button advances the mode setting in sequence.
•
AUTO
DRY
COOL
HEAT
FAN
Press
2.
.
• “
” is displayed on the LCD.
The multi-monitor lamp lights up.
•
The colour of the lamp varies depending on the
operation mode.
Display
To stop operation
Press
again.
“
•
” disappears from the LCD.
The multi-monitor lamp goes off.
•
Operation
Multi-monitor lamp
AUTO
Red/Blue
DRY
Green
COOL
Blue
HEAT
Red
FAN
White
NOTE
MODE
Notes on each operation mode
HEAT
Since this air conditioner heats the room by taking heat from outdoor air to indoors, the heating capacity becomes smaller in
•
lower outdoor temperatures. If the heating effect is insuf
fi
cient, it is recommended to use another heating appliance in
combination with the air conditioner.
The heat pump system heats the room by circulating hot air around all parts of the room. After the start of HEAT operation,
•
it takes some time before the room gets warmer.
In HEAT operation, frost may occur on the outdoor unit and lower the heating capacity. In that case, the system switches
•
into defrosting operation to take away the frost.
During defrosting operation, hot air does not
fl
ow out of indoor unit.
•
COOL
This air conditioner cools the room by releasing the heat in the room outside.
•
Therefore, the cooling performance of the air conditioner may be degraded if the outdoor temperature is high
DRY
Eliminates humidity while maintaining the indoor temperature as much as possible. It automatically controls temperature and
•
air
fl
ow rate, so manual adjustment of these functions is unavailable.
AUTO
In AUTO operation, the system selects an appropriate operation mode (COOL or HEAT) based on the indoor temperature
•
and starts the operation.
The system automatically reselects setting at a regular interval to bring the indoor temperature to the user-setting level.
•
FAN
This mode is valid for fan only.
•
01_EN_3P369488-1.indd 11
01_EN_3P369488-1.indd 11
6/11/2014 10:58:53 AM
6/11/2014 10:58:53 AM