25
WEEKLY TIMER Operation
NOTE
Notes on WEEKLY TIMER operation
Do not forget to set the clock on the remote controller
fi
rst.
•
Page 10
The day of the week, ON/OFF TIMER mode, time and set temperature (only for ON TIMER mode) can be set with the WEEKLY TIMER.
•
Other settings for the ON TIMER are based on the settings just before the operation.
WEEKLY TIMER and ON/OFF TIMER operation cannot be used at the same time. The ON/OFF TIMER operation has priority if it is set while
•
WEEKLY TIMER is still active. The WEEKLY TIMER will enter the standby state, and “
” will disappear from the LCD. When the
ON/OFF TIMER is up, the WEEKLY TIMER will automatically become active.
Turning off the circuit breaker, power failure, and other similar events will render operation of the indoor unit’s internal clock inaccurate.
•
Reset the clock.
Page 10
6.
Press
to select the desired time.
The time can be set between 0:00 and 23:50 in 10-minute intervals.
•
To return to the ON/OFF TIMER mode setting, press
•
.
Proceed to step
•
9
when setting the OFF TIMER.
Press
7.
.
The time will be set.
•
“
•
” and the temperature blink.
Press
8.
to select the desired temperature.
The temperature can be set between 10°C and 32°C.
•
COOL or AUTO: The unit operates at 18°C even if it is set to 10 to 17°C.
Page 12
HEAT or AUTO: The unit operates at 30°C even if it is set to 31 to 32°C.
Page 12
To return to the time setting, press
•
.
The set temperature is only displayed when the mode setting is on.
•
Press
9.
.
Be sure to direct the remote controller toward the indoor unit and check for a receiving
•
tone and blinking of the multi-monitor lamp.
The temperature and time are set while in ON TIMER operation, and the time is set
•
while in OFF TIMER operation.
The next reservation screen will appear.
•
To continue further settings, repeat the procedure from step
•
4
.
The multi-monitor lamp blinks twice.
•
The TIMER lamp periodically lights orange.
Page 5
The multi-monitor lamp will not blink orange if all the reservation settings are deleted.
Display
Press
10.
to complete the setting.
“
•
” is displayed on the LCD and WEEKLY TIMER operation is activated.
A reservation made once can be easily copied and the same settings used for another
•
day of the week. Refer to
Copy mode
.
Page 26
01_EN_3P369488-1.indd 25
01_EN_3P369488-1.indd 25
6/11/2014 10:59:16 AM
6/11/2014 10:59:16 AM