background image

EKHBRD011~Y1

Indoor unit for air to water heat pump system and options

4PW60971-1

Operation manual

18

M

AINTENANCE

Maintenance activities

In order to ensure optimal availability of the unit, a number of checks
and inspections on the unit and the 

fi

eld wiring have to be carried out

at regular intervals, preferably yearly. This maintenance should be
carried out by your local Daikin technician (see installation manual).

The only maintenance which may be required by the operator is:

keeping the remote controller clean by means of a soft damp
cloth,

checking if the water pressure indicated on the manometer is
above 1 bar.

Important information regarding the refrigerant used

This product contains 

fl

uorinated greenhouse gases covered by the

Kyoto Protocol.

Refrigerant type:

R134a

GWP

(1)

 value:

1300

(1)

 GWP = global warming potential

Periodical inspections for refrigerant leaks may be required
depending on European or local legislation. Please contact your local
dealer for more information.

T

ROUBLESHOOTING

The guidelines below might help to solve your problem. If you cannot
solve the problem, consult your installer.

D

ISPOSAL

 

REQUIREMENTS

Dismantling of the unit, treatment of the refrigerant, of oil and of other
parts must be done in accordance with relevant local and national
legislation.

Your product is marked with this symbol. This means that
electrical and electronic products shall not be mixed with
unsorted household waste.

Do not try to dismantle the system yourself: the dismantling of the
system, treatment of the refrigerant, of oil and other parts must be
done by a quali

fi

ed installer in accordance with relevant local and

national legislation.

Units must be treated at a specialized treatment facility for re-use,
recycling and recovery. By ensuring this product is disposed off
correctly, you will help to prevent potential negative consequences for
the environment and human health. Please contact the installer or
local authority for more information.

If the supply cord is damaged, it must be replaced by the
manufacturer, its agent or similar quali

fi

ed persons in order

to avoid hazards.

During longer periods of standstill, e.g. during summer with
a heating only application, it is very important NOT TO
SWITCH OFF THE POWER SUPPLY towards the unit.

Switching off the power supply stops the automatic
repetitive movement of the pump in order to prevent it from
getting jammed.

P

OSSIBLE

 

CAUSES

C

ORRECTIVE

 

ACTIONS

No readings on the remote controller 
(blank display)

• Check if the mains power is still 

connected to your installation.

• The bene

fi

t kWh rate power supply is 

active (see installation manual).

One of the error codes appears

Consult your local dealer.
Refer to the installation manual for a 
detailed list of error codes.

The schedule timer does work but 
the programmed actions are 
executed at the wrong time
(e.g. 1 hour too late or too early)

Check if the clock and the day of the 
week are set correctly, correct if 
necessary.

The domestic hot water schedule 
timer is programmed but does not 
work.

In case the 

pr

 icon is not displayed, 

push the 

pr

 button to enable the 

schedule timer.

Capacity shortage

Consult your local dealer.

Содержание EKHBRD014ABV1

























Отзывы: