background image

EKHBRD011~Y1

Indoor unit for air to water heat pump system and options

4PW60971-1

Operation manual

8

The storage temperature set point is a 

fi

eld setting. Refer to the

chapter "Field settings" on page 15 for a detailed description how to
set one or more 

fi

eld settings.

[b-03]

  set point: storage temperature (see 

fi

gure "Domestic

water heating modes" on page 6) only valid if [b-02]=0.

[b-02]

 Status: de

fi

nes whether the weather dependent domestic

water heating is turned ON (1) or OFF (0).

If enabled, the storage set point will be set weather dependent.
In case of a higher ambient temperature (e.g. during summer-
time), temperature of supply water to the domestic hot water
tank will be higher too, so that storage temperature set point can
be set lower in order to keep the overall equivalent hot water
amount the same during the whole year. Therefor it is
recommended to use this function.

[b-04]

  Automatic maximum domestic hot water storage

temperature: default = 70°C.

Manual storage is deactivated automatically when the set point for
the domestic hot water storage temperature is reached. It can also be
stopped at any time by pushing the 

w

 button.

Reheat

This mode will prevent the domestic hot water from cooling down
lower than a certain temperature. When enabled the indoor unit will
deliver hot water to the domestic hot water tank when the reheat
minimum value is reached. The domestic water heating will continue
until the reheat maximum temperature is reached.

Selecting reheat operation for domestic water heating

1

Use the 

w

 button to enable reheat operation.

The 

w

 icon will display.

2

Press the 

w

 button again to disable reheat operation.

The 

w

 icon disappears.

The reheat minimum and reheat maximum temperature set points
are 

fi

eld settings. Refer to the chapter "Field settings" on page 15 for

a detailed description how to set one or more 

fi

eld settings.

[b-00]

  Set point: reheat minimum temperature (see 

fi

gure

"Domestic water heating modes" on page 6).

[b-01]

  Set point: reheat maximum temperature (see 

fi

gure

"Domestic water heating modes" on page 6).

Disinfection operation

This mode will disinfect the domestic hot water tank by periodically
heating the domestic water to a speci

fi

c temperature. During the

operation of this mode the 

w

  icon will be blinking rapidly with 0.5

second intervals. 

The disinfection temperature set point is a 

fi

eld setting as are the

retention time, day and hour. Refer to the chapter "Field settings" on
page 15 f
or a detailed description how to set one or more 

fi

eld

settings.

[4-00] 

Status: de

fi

nes whether the disinfection function is turned

ON (1) or OFF (0).

[4-01]

 Operation interval: day of the week at which the domestic

water should be heated.

[4-02] 

Start time: time at which the disinfection operation is

started.

[5-00]

  Set point: Disinfection water temperature to be reached

(see 

fi

gure "Domestic water heating modes" on page 6).

[5-01] 

Duration: time period de

fi

ning how long the disinfection

set point temperature should be maintained.

Even if all schedule timers are de-activated and there is no reheat
function active, the disinfection function will operate if a domestic hot
water tank is installed and 

fi

eld setting [4-00] is set to ON.

Emergency operation

[8-02]

 Emergency operation

During emergency mode, heating is only done by the heater kit,
not by the heat pump.

Activation of emergency mode is done by changing 

fi

eld setting

[8-02]=1.

Activating the emergency mode will stop the heat pump
operation. The pump of the indoor unit will be started, but
heating itself is done by the heater kit. If there are no error
conditions in leaving or returning water thermistors, the heater
kit can start to follow emergency operation.

A

Ambient temperature

T

Domestic hot water storage temperature

NOTE

The ambient temperatures for weather dependent
domestic water heating (see 

fi

gure) are 

fi

xed and can

not be changed.

NOTE

If weather dependent domestic water heating is
enabled [b-02], the storage temperature will be set
automatically and the 

fi

eld setting [b-03] will be of no

importance.

NOTE

Remark that the 

w

 icon will be continuously lit as

long as the reheat function is enabled. It is not
possible to see when the indoor unit is reheating
the domestic hot water tank.

T

A

[b-04]

55

°

C

15

°

C

25

°

C

NOTE

Remark that pushing the 

y

 button has no in

fl

uence

on the domestic water heating. Domestic water
heating is only switched on or off by means of the 

w

button and/or disabling the storage schedule timer.

NOTE

Remark that the 

w

  icon will only be blinking during

effective operation.

During the operation it is always possible to cancel the
disinfection function by pushing the 

w

 button once.

Be aware that after pushing the 

w

 button, it is possible

that the permanently lit 

w

 icon still displays, meaning

that the reheat function is enabled.

NOTE

If a domestic hot water tank is installed, the disinfection
function is enabled by default.

NOTE

Before activating emergency operation, be sure to
activate the heater kit. The heater will stay in
emergency mode until the 

fi

eld setting is set back

to default [8-02]=0.

Содержание EKHBRD014ABV1

























Отзывы: