D
–EIMWC00803-21_01EN - 45/57
WARNING
– Once the cover has been opened, observe ESD precautions and wear protective gloves
against electrostatic discharge during maintenance or assembly.
14.5.2 Residual risks
Following the application of the derived corrective / improvement measures of the risk analysis, a series of res idual risks
have been identified, defined in accordance with the ISO 12100 standard:
risk remaining after protective measures have
been implemented
.
•
PE-ADDA400 and PE-ADDA330 products may only be installed in machines designated by the manufacturer
Daikin Applied Europe S.p.A. In case of use outside the specifications set out in this manual, the manufacturer
’s
responsibilities Daikin Applied Europe S.p.A. they come to decay.
•
During the transport and handling of the product, it is strictly recommended to use a forklift or pallet truck. It is
strictly forbidden to carry the product by hand.
•
In the assembly and adjustment phases, it is recommended to use suitable tools and PPE (Personal protective
equipment) with adequate strength and mechanical protection.
•
Before performing any maintenance and / or adjustment operations on the product, make sure that it has been
disconnected and that the capacitors have been discharged, as indicated on the warning label on the same.
14.6 HANDLING AND TRANSPORT
The control panels can be transported, to be located at the place of use, by pallet truck, forklift, crane or bridge crane.
Pallet Truck
Check the center of gravity before lifting.
