IM 1229-1 • INTELLIGENT EQUIPMENT 3
www.DaikinApplied.com
I
nTroduCTIon
I
nTroduCTIon
Reference Documents
Number
Company
Title
Source
OM 1218
Daikin Applied
Operation and
Maintenance Manual www.daikinapplied.com
IM 1219
Daikin Applied
Installation Manual
www.daikinappled.com
Limited Warranty
Consult your local Daikin Representative for warranty
details. Refer to Form 933-43285Y. To find your local Daikin
representative, go to
www.DaikinApplied.com
.
Notice
© 2015 Daikin Applied, Minneapolis MN. All rights reserved
throughout the world.
Daikin reserves the right to change any information contained
herein without prior notice. The user is responsible for
determining whether this software is appropriate for his or her
application.
General Information
This manual contains the information you need to replace
an existing gateway for the Intelligent Equipment solution.
For installation Technical Support, please contact the Daikin
Applied Controls Support Group at (866) 462-7829.
Hazard Identification Messages
Recognize Safety Symbols, Words and Labels
The following symbols and labels are used throughout this
manual to indicate immediate or potential hazards. It is the
owner and installer’s responsibility to read and comply with
all safety information and instructions accompanying these
symbols. Failure to heed safety information increases the
risk of property damage and/or product damage, serious
personal injury or death. Improper installation, operation and
maintenance can void the warranty.
DANGER
Dangers indicate a hazardous situation which will result in
death or serious injury if not avoided.
WARNING
Warnings indicate potentially hazardous situations, which can
result in property damage, severe personal injury, or death if
not avoided.
CAUTION
Cautions indicate potentially hazardous situations, which can
result in personal injury or equipment damage if not avoided.
WARNING
Electric shock hazard . Can cause personal injury or
equipment damage .
This equipment must be properly grounded. Connections and
service to the MicroTech III Air Handling Unit Controller and
Machine-to-Machine Gateway must be performed only by
personnel knowledgeable in the operation of the equipment
being controlled.
CAUTION
Static sensitive components . Can cause equipment
damage .
Discharge any static electrical charge by touching the bare
metal inside the control panel before performing any service
work. Never unplug cables, circuit board terminal blocks, or
power plugs while power is applied to the panel.
NOTICE
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with this instruction manual, may cause interference to radio
communications. It has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15 of the
FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment
is operated in a commercial environment. Operation of this
equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct
the interference at his or her own expense.
Daikin disclaims
any liability resulting from any interference or for the
correction thereof .
