IM 1229-1 • INTELLIGENT EQUIPMENT 6
www.DaikinApplied.com
r
emoval
and
I
nsTallaTIon
I
nsTruCTIons
Connection of Power Supply
The M2M Gateway is powered by a 120VAC (primary) to
24VDC (secondary) power supply. The 24 VDC connection
is made via a pre-fabricated, keyed plug coming from the low
voltage end of the power supply. Disconnect this plug from the
M2M Gateway receptacle marked, “Power Input” (
Figure 3
).
Figure 3: M2M Power Input
Antenna and Ethernet Connections
Depending on the application, the M2M Gateway could be
connected to the cloud via cellular, Wi-Fi, or LAN. If the
application is cellular or Wi-Fi, unscrew the SMA coaxial
connector from the M2M SMA coaxial connector; “3G/GPRS”
for cellular or “WLAN” for Wi-Fi. (
Figure 4
).
Figure 4: 3G and WLAN Connections
If the application is LAN, unplug the USB-to-Ethernet adapter
(
Figure 5
) from the “USB2” port of the M2M.
Figure 5: USB-to-Ethernet Adapter
