Daikin Clima-Flex CLIWP Series, Руководство по управлению

Страница: 9 / 18

cm-cliwp-cf-eng www.clima-flex.com
9
INTRODUCTION TO THE L-INX CONFIGURATOR
Before setting up a working IEC61131 program, it is necessary to configure the data points of the L-IOB device. These may be I/O data
points, network variables, registers, etc. Before executing the following steps, install the L-INX Configurator software from the ‘setup.exe’
file. This file can be downloaded from www.loytec.com.
To start a configurator project:
1. Start the L-INX Configurator software by selecting Windows Start → Programs → LOYTEC LINX Configurator → LOYTEC LINX
Configurator. The application starts and displays the data point manager screen as shown in Figure 7.
2. When the device is online, connect to the device by clicking the connection speed button on the LNS or device as indicated by the red
rectangle in Figure 7.
3. For detailed information on how to create data points, etc., refer to the LINX configurator user manual.
Figure 3. Main screen of the L-INX Configurator.
Control
EXPANSION MODULE CONFIGURATION
The L-INX Configurator uses a separate tab for I/O configuration. I/O configuration can be done off-line and is shown in the following
steps.
1. For LIOB-48x/58x models, select the L-IOB tab and then LIOB-LOCAL.