Daikin Clima-Flex CLIWP Series, Руководство по управлению

Страница: 11 / 18

cm-cliwp-cf-eng www.clima-flex.com
11
24 VAC COM
Linea Neutro
TRANFORMADOR
24
VD
C
TRANSFORMADOR SELECCIONADO
DE ACUERDO A CONSUMO Y
ALIMENTACION REQUERIDA
INSTRUMENTACION SELECCIONADA DE ACUERDO A CARACTERISTICAS DE CONTROL
120 / 220
VAC
AP
BP TEx TR TI MS
Modbus RTU + 24VDC
LSTAT
ACf
Figure 4. Loytec Inputs / Outputs Diagram.
Control
USE OF CLIWP SYSTEM.
The CLIWP system has a digital thermostat which can be used
as a temperature sensor or in this case it is configured so that
the equipment can be turned on and the system points can be
modified.
The following describes the use of the LSTAT thermostat as shown
in Fig. 9 and the indicators it contains; in this case the icons shown
are part of the CLIWP system startup system.
System startup:
Figure 5. Thermostat LSTAT
In order to start the system, press the house icon
located at the bottom of the thermostat.
After pressing the icon you will notice that the icon on the screen
will change as shown in the following images.
Once the above steps have been completed,
the evaporator fans will start up. During
this process the displayed time icon will be
shown on the display.