background image

English

2

Consult your local dealer regarding 
what to do in case of refrigerant leak-
age.

When the air conditioner is to be installed 
in a small room, it is necessary to take 
proper measures so that the amount of 
any leaked refrigerant does not exceed 
the concentration limit in the event of a 
leakage. Otherwise, this may lead to an 
accident due to oxygen depletion.

Contact professional personnel about 
attachment of accessories and be 
sure to use only accessories specified 
by the manufacturer.

If a defect results from your own work-
manship, it may result in water leaks, 
electric shock or fire.

Consult your local dealer regarding 
relocation and reinstallation of the air 
conditioner.

Improper installation work may result in 
leakage, electric shocks or fire hazards. 

Be sure to use fuses with the correct 
ampere reading. 

Do not use improper fuses, copper or 
other wires as a substitute, as this may 
result in electric shock, fire, injury or dam-
age to the unit. 

Be sure to install an earth leakage 
breaker. 

Failure to install an earth leakage breaker 
may result in electric shocks or fire.

Be sure to earth the unit. 

Do not earth the unit to a utility pipe, light-
ning conductor or telephone earth lead. 
Imperfect earthing may result in electric 
shocks or fire. 
A high surge current from lightning or 
other sources may cause damage to the 
air conditioner.

Consult the dealer if the air condi-
tioner submerges owing to a natural 
disaster, such as a flood or typhoon.

Do not operate the air conditioner in that 
case, or otherwise a malfunction, electric 
shock, or fire may result.

Do not start or stop operating the air 
conditioner with the power supply 
breaker turned ON or OFF.

Otherwise, fire or water leakage may 
result. Furthermore, the fan will rotate 
abruptly if power failure compensation is 
enabled, which may result in injury.

Do not use the product in the atmo-
sphere contaminated with oil vapor, 
such as cooking oil or machine oil 
vapor.

Oil vapor may cause crack damage, elec-
tric shocks, or fire.

Do not use the product in places with 
excessive oily smoke, such as cook-
ing rooms, or in places with flammable 
gas, corrosive gas, or metal dust.

Using the product in such places may 
cause fire or product failures.

Do not use flammable materials (e.g., 
hairspray or insecticide) near the 
product.
Do not clean the product with organic 
solvents such as paint thinner.

The use of organic solvents may cause 
crack damage to the product, electric 
shocks, or fire.

Be sure to use a dedicated power sup-
ply for the air conditioner.

The use of any other power supply may 
cause heat generation, fire, or product 
failures.

CAUTION

Do not use the air conditioner for pur-
poses other than those for which it is 
intended.

Do not use the air conditioner for cooling 
precision instruments, food, plants, ani-
mals or works of art as this may adversely 
affect the performance, quality and/or 
longevity of the object concerned.

Do not remove the outdoor unit’s fan 
guard.

The guard protects against the unit’s high 
speed fan, which may cause injury.

Do not place objects that are suscepti-
ble to moisture directly beneath the 
indoor or outdoor units.

Under certain conditions, condensation 
on the main unit or refrigerant pipes, air 
filter dirt or drain blockage may cause 
dripping, resulting in fouling or failure of 
the object concerned.

To avoid oxygen depletion, ensure 
that the room is adequately ventilated 
if equipment such as a burner is used 
together with the air conditioner.

01_EN_3P107422-1S.fm  Page 2  Monday, June 2, 2008  5:55 PM

Содержание BRC7E530W





















Отзывы: