Installation manual
BRC2E52C7 / BRC3E52C7
39
4P368041-1
–
2014.02
Single and Dual setpoint mode
17. Single and Dual setpoint mode
● When a centralized controller is connected, the remote controller is forced to single setpoint
mode. It is not possible to change to dual setpoint mode.
NOTE
● Switch between Single setpoint mode and Dual setpoint mode
● Single setpoint mode is set by selecting “Single SP”
● Dual setpoint mode is set by selecting “0°C” – “8°C”
17-1
Enable the Menu/Enter and Cancel
button. To enable, refer to
"4-2
Enable/disable the Menu/Enter and
Cancel button" on page 12
.
<Basic screen>
17-2
Press and hold the Cancel button for
4 seconds or longer. The Service
Settings menu is displayed.
17-2
28
°C
<Service Settings>
Press and hold the Cancel
button for 4 seconds or
longer while the backlight
is lit.
17-3
Select
Min Setpoints Differential
and press the Menu/Enter button.
The "Min Setpoints Differential"
screen is displayed.
17-3
Setting
Return
Test Operation
Maintenance Contact
Field Settings
Min Setpoints Differential
External Input Interlock
Group Address
1/3
Service Settings
Press the Menu/Enter
button.
17-4
Select “None”, “Single SP” or
“0°C” – “8°C” by using the
(Up/
Down) buttons.
17-5
Press the Menu/Enter button. The
confirmation screen is displayed.
17-4
17-5
Setting
Return
Single Sp
Min Setpoints Differential
Min Setpoints Differential
Press the Menu/Enter
button.
17-6
Select
Yes
and press the Menu/
Enter button. The settings are
confirmed and the Service Settings
menu returns.
17-6
Setting
Return
Save the settings?
No
Yes
Min Setpoints Differential
<Service Settings>
Press the Menu/Enter
button.
17-7
Press the Cancel button once. The
remote controller restarts and the
Basic screen returns.
Содержание BRC2E52C7
