Daikin Altherma 3 H MT ECH2O, Руководство по установке для специалистов

Страница: 297 / 304

10/13
Breadcrumb Field code Setting name Range, step
Default value
Date Value
Field settings table
Installer setting at variance with
default value
9.I [5-04] R/W 0~20°C, step: 1°C
10°C
9.I [5-05] R/W 0~50 A, step: 1 A
50 A
9.I [5-06] R/W 0~50 A, step: 1 A
50 A
9.I [5-07] R/W 0~50 A, step: 1 A
50 A
9.I [5-08] R/W 0~50 A, step: 1 A
50 A
9.I [5-09] R/W 0~20 kW, step: 0,5 kW
20 kW
9.I [5-0A] R/W 0~20 kW, step: 0,5 kW
20 kW
9.I [5-0B] R/W 0~20 kW, step: 0,5 kW
20 kW
9.I [5-0C] R/W 0~20 kW, step: 0,5 kW
20 kW
9.I [5-0D] R/O 0: 230V, 1~ (*6, *7, *9)
2: 400V, 3~ (*8)
9.I [5-0E] 1
9.I [6-00] R/W 2~40°C, step: 1°C
8°C
9.I [6-01] R/W 0~10°C, step: 1°C
0°C
9.I [6-02] R/W
0~10kW, step: 0,2kW
0kW
9.I [6-03] R/W 0~10kW, step: 0,2kW
0kW
2kW (*7)
3kW (*6, *8, *9)
9.I [6-04] R/W (*7,
*8)
R/O (*6,
*9) 0~10kW, step: 0,2kW
0kW (*6)
3kW (*9)
4kW (*7)
6kW (*8)
9.I [6-07] 0
9.I [6-08] R/W 2~20°C, step: 1°C
10°C
9.I [6-09]
0
9.I [6-0A] R/W 30~[6-0E]°C, step: 1°C
60°C
9.I [6-0B] R/W 30~min(50, [6-0E])°C, step: 1°C
45°C
9.I [6-0C] R/W 30~min(50, [6-0E])°C, step: 1°C
45°C
9.I [6-0D] R/W 0: Reheat only
3 scheduled reheat
9.I [6-0E] R/W [E-07]=4
40~ 75°C, step: 1°C
65°C
9.I [7-00] R/W 0~4°C, step: 1°C
0°C
9.I [7-01] R/W 2~40°C, step: 1°C
2°C
9.I [7-02] R/W 0: 1 LWT zone
1: 2 LWT zones
9.I [7-03] 2.5
9.I [7-04] 0
9.I [7-05] R/W 0: Very high
1: High
2: Medium
3: Low
4: Very low
9.I [7-06] R/W
0: Disabled
1: Enabled
9.I [7-07] R/W 0: Disabled
1: Enabled
9.I [7-08] DHW stratification R/W 0: Disabled (*2)
1: Enabled (*1)
9.I [7-09] 20
9.I [7-0A] R/W
20~95%, step 5%
95%
9.I [7-0B] R/W 20~95%, step 5%
95%
9.I [7-0C] R/W 20~300 seconds, step 5 sec
125 seconds
9.I [7-0D] R/W
2~20, step 0,5 °C
4 °C
9.I [7-0E] R/W 2~22, step 0,5 °C
7 °C
9.I [8-00] R/O 0~20 min, step 1 min
1 min
9.I [8-01] R/W 5~95 min, step: 5 min
30 min
9.I [8-02] R/W 0~10 hour, step: 0,5 hour
0,5 hour
9.I [8-03] R/W 20~95 min, step: 5 min
50 min
9.I [8-04] R/W 0~95 min, step: 5 min
95 min
9.I [8-05] R/W 0: No
1: Yes
9.I [8-06] R/W 0~10°C, step: 1°C
5°C
9.I [8-07] R/W [9-03]~[9-02], step: 1°C
18°C
Set point correction for domestic hot water temperature.
What is the requested limit for DI1?
What is the requested limit for DI2?
What is the requested limit for DI3?
What is the requested limit for DI4?
What is the requested limit for DI4?
What is the requested limit for DI1?
What is the requested limit for DI2?
What is the requested limit for DI3?
Backup heater voltage
--
The temperature difference determining the heat pump OFF temperature.
What is the capacity of the booster heater?
What is the capacity of the backup heater step 1?
The temperature difference determining the heat pump ON temperature.
What is the capacity of the backup heater step 2?
--
What is the desired eco storage temperature?
What is the hysteresis to be used in reheat mode?
--
What is the desired comfort storage temperature?
What is the desired reheat temperature?
BBR16 activation*
*BBR16 settings are only visible when the language of the user interface is set to
Swedish.
Minimum running time for domestic hot water operation.
--
Additional zone fixed pump PWM, in case a bizone kit is installed.
Main zone fixed pump PWM, in case a bizone kit is installed.
Time needed by the mixing valve to turn from one side to the other, in case a
bizone kit is installed.
What is the desired DHW production type?
Maximum running time for domestic hot water operation.
What is the desired comfort main LWT in cooling?
What is the maximum temperature setpoint?
Domestic hot water booster heater overshoot temperature.
Domestic hot water booster heater hysteresis.
How many leaving water temperature zones are there?
--
--
Boiler efficiency
Compressor forced OFF
Anti-recycling time.
Booster heater delay timer.
Additional running time for the maximum running time.
Allow modulation of the LWT to control the room temp?
Leaving water temperature maximum modulation.
Hysteresis value used to control the tank bivalent in case it’s supporting space
heating operation
Offset on the setpoint to determine when the tank is high enough to go the excess
state
4P670987-1 - 2021.09
(*1) 300 Tank_(*2) 500 Tank_
(*3) *X*_(*4) *H*_(*5) *B*_
(*6) EKECBUA3V_(*7) EKECBUA6V_(*8) EKECBUA9W_
(*9) BUH less