Daikin ACS320, Руководство по эксплуатации

Страница: 13 / 116

Tuning - Parameters
The system can benefit from one or more of the MD4 special
features, and/or fine tuning.
1 . Review the parameter descriptions in
“ParameterDescriptions” starting on page 30 . Enable
options and fine tune parameter values as appropriate
for the system .
2 . Edit parameters as appropriate .
Fault and Alarm Adjustments
The MD4 can detect a wide variety of potential system
problems . For example, initial system operation may generate
faults of alarms that indicate set-up problems .
1 . Faults and alarms are reported on the control panel with
a number . Note the number reported .
2 . Review the description provided for the reported fault/
alarm:
• Use the fault and alarm listings shown in “Fault
Tracing” starting on page 90 .
• Press the help key (Assistant Control Panel only)
while fault or alarm is displayed .
3 . Adjust the system or parameters as appropriate .
Start-Up
Figure 10: Changing the Parameters Individually
To change the parameters, follow these steps:
1
Select MENU to enter the main menu .
2
Select the Parameters mode with the UP/DOWN buttons and
select ENTER to select the Parameters mode .
3
Select the appropriate parameter group with
the UP/DOWN buttons and select SEL
4
Select the appropriate parameter in a group
with the UP/DOWN buttons .
Select EDIT to change the parameter value .
5
Press the UP/DOWN buttons to change the parameter value .
6
Select SAVE to store the modified value or
select CANCEL to leave the set mode .
Any modifications not saved are cancelled.
7
Select EXIT to return to the listing of parameter groups,
and again to return to the main menu .
To complete the control connections by manually entering the parameters, see “Parameters Mode” in this section .
For detailed hardware description, see the “Technical data” section .
s
TarT
u
p
www .DaikinApplied .com 13 OM 1190-1 • MD4 VFD