SQLC-216-212
15
b) Reset collectively
Resets the maximum and minimum values of all measurement element.
Can be operated in the same way in the control input by the setting.
① At the maximum / minimum measurement display mode, press the【RESET】
and【＋】
for more than 1 second.
Maximum value display mode Reset completion
6.5 Setting value display mode
From the instant measurement display mode, press【SET】
and【－】
to enter setting value display mode.
Pressing the 【＋】
【－】
switch in the setting value display mode, switching the voltage setting and current
setting.
If you press the【DISPLAY】
switch or do not operate any switches for over 10 seconds, the instant measurement
display mode is restored.
【Instant measurement display mode】 【Voltage setting】 【Current setting】
Main-monitor (upper side)
：Primary rated current
Sub-monitor (lower side)
：Current sensor rating
Main-monitor (upper side)
：Primary rated voltage
Sub-monitor (lower side)
：Secondary rated voltage
or not operate
for over 10
seconds
＋
−
で
SET and －
DISPLAY
RESET and ＋
1 second
Maximum
measurement
display
