Daihen OTC Welbee P402L, Руководство пользователя

Страница: 22 / 166

P
RODUCT
C
ONFIGURATION
P
RODUCT
S
PECIFICATION AND
C
ONFIGURATION
C
HAPTER
2
20
• At TIG welding:
T I P S
• The TIG valve kit, which is an optional accessory item, enables you to lay piping in the
welding power source. When using this kit, turn ON F81. ( 6.7.2.63 F81: Torch switch
setting with TIG mode)
• For the procedure for installing the TIG valve kit (optional accessory) to the welding power
source, refer to the instruction manual of the TIG valve kit. Connect the kit to the torch as
shown in the following figure.
No. Name
Supplied unit
(*1)
Optional
accessories
Remarks
1 Gas regulator To be prepared by the customer.
(
2.2.3
-
Accessory (not supplied)) 2 Welding torch
3 Gas hose (3 m)
○
(*2) (*3)
4 Power cable for base metal side (2 m)
○
(*2)
5 Shield gas
To be prepared by the customer.
(
2.2.3
-
Accessory (not supplied))
6 Digital remote control (optional)
○
E-2454
(
2.2.4
-
Optional accessories)
7 Analog remote control (3 m) (optional)
○
K5804S00 (*2)
8
TIG valve kit (optional)
○
K8197A00
*1: Standard component with welding power source. (Supplied when placing order for the welding power source)
*2: Optional extension cable and hose (5 m/10 m/15 m/20 m) are also available. (
2.2.4
-
Optional accessories)
*3: The TIG valve kit, which is an optional accessory item, enables you to lay piping in the welding power source. (
2.2.4
-
Optional
accessories)
4
7
3
1
2
6 8
Base metal
5
Welding power source
TIG valve kit