I
NITIALIZING
W
ELDING
JOB
AND
I
NTERNAL
F
UNCTIONS
A
DMINISTRATOR
F
UNCTIONS
C
HAPTER
7
129
Chapter 7
Administrator F
unctions
6.
Press the screen operation knob.
7.4 Initializing Welding JOB and Internal Functions
This section explains how to initialize the welding JOB and internal functions.
If initialized, the welding JOB currently used and internal function values will return to the default (initial) setting.
However, does not affect the welding JOB registered in memory.
NOTE
•
F39 to 42 will not be initialized.
1.
Turn OFF the power switch.
2.
Press and hold the WIRE INCH key and left DISPLAY CHANGE key simultaneously and turn ON the power
switch.
3.
Check that "End" is displayed on the left/right digital meters and turn OFF the power switch.
The power LED switch lights off. The status returns to normal when the power switch is turned on.
Importing the backup data starts. During backup, the
display of right digital meter changes.
When importing is completed, "End" will be displayed on
the right digital meter.
●
Hold the two keys pressed down until "End" is displayed
on the left/right digital meters.
Initialization starts.
+
ON
