8. Removal of front pillar garnish
(1) Disconnect the clips provided on the back side of the
front pillar garnish, using a clip remover or the like.
(2) Remove the front pillar garnish.
BO–66
9. Removal of lower back trim
(1) Unlock the clips by pushing the central part of the
clips one notch.
(2) Remove the clips from the lower back trim.
(3) Remove the lower back trim.
10. Remove the deck board assembly by removing the at-
taching bolts.
11. Removal of deck side trim
(1) Remove the rear seat outer belt anchor.
(Refer to the seat belt section.)
(2) Unlock the clips by pushing the central part of the
clips one notch.
(3) Remove the deck side trim by carefully disconnecting
the three spring clips installed at the rear door side.
(4) Remove the luggage room lamp connector.
(Only for luggage room lamp-equipped model. Refer
to the BE section.)
12. Remove the rear floor rear carpet.
13. Removal of roof side inner garnish
(1) Remove the rear seat outer belt anchor assembly.
(Refer to the seat belt section for the removal proce-
dure.)
(2) Disconnect the retainers of the roof side inner garnish
by pulling it out, using a clip remover.
(3) Remove the roof side inner garnish.
14. Remove the assist grip assembly by removing the attach-
ing screws.
NOTE:
·
Open the cover for assist grip attaching screws, before
removing the attaching screws, if the model equipped
with the assist grip attaching screw cover.
JBO00175-00150
JBO00176-00222
JBO00177-00151
JBO00178-00152
JBO00179-00153
