22. Install the door trim bracket with the attaching screws.
23. Connect the front door inside handle subassembly to the front door open control link.
24. Installation of outside rear view mirror
(1) Install the outside rear view mirror with the three attaching nuts.
(2) Connect the connector of the front door wire harness to the connector of the remote control mirror.
(For remote control rear view mirror-equipped model.)
(3) Connect the clamp of the wire harness to the door panel.
25. Connect the connector of the front door wire harness to the power window switch. (For power window-
equipped model.)
26. Insert the front door inside handle subassembly into the front door trim panel assembly.
27. Hang the front door trim panel assembly on the front door panel.
28. Connect the front door trim panel assembly to the front door panel by connecting the retainers on the
front door trim panel assembly.
29. Connect the front door inside handle to the front door panel and install the attaching screw.
NOTE:
·
An oversize screw is available as a spare part for cases where the ordinary screw becomes loose.
30. Install the front door pull handle to the front door with the attaching screw.
NOTE:
·
An oversize screw is available as a spare part for cases where the ordinary screw becomes loose.
31. Install the shaft snap ring to the front door window handle.
NOTE:
·
Install the shaft snap ring to the front regulator handle in such a direction that the open end faces to-
ward the handle side.
32. Install the front door window handle to the window regulator with the door vent window control handle
plate.
33. Install the front door lower fame bracket garnish.
34. Screw in the front door locking button.
BO–51
JBO00132-00000
