Dahua SD6AE series, Руководство по установке

Страница: 32 / 47

23
5.2 Corner-mounted Bracket Installation Steps
5.2.1 Installation Conditions
Corner-mounted speed dome can be installed on hard wall structure which forms an included
angle of 90
°
in both indoor and outdoor environments. The wall needs to meet the following
installation conditions:

The wall shall be thick enough to install expansion bolts.

The wall needs to sustain at least 8X weight of the camera and bracket etc.
5.2.2 Installation Steps
Step 1
AS it is shown in Figure 5-3, take the mounting hole of corner-mounted accessory as template,
draw punching position on the wall with 90
°
included angle and install M8 expansion bolt. Pull the
integrated cable through the center hole of corner-mounted pedestal, leave enough wiring length
and use M8 nut to fasten corner-mounted pedestal on the wall firmly, and then use silicon
sealant to cover cable outlet and make it waterproof.
Figure 5-3
Step 2
Install speed dome, as it is shown in Figure 5-4; please refer to
“2.7 Speed Dome Installation” for
exact installation modes.