Dahua ESS3016X, Руководство пользователя

Страница: 29 / 85

ESS3016X User’s Manual
29
z
Seek error
z
Boot up
z
Correct
z
Temperature
z
Rate
In the following interface, there are three buttons: return/detail information/initialization. See
Figure 3-22.
z
Back: You can click it to go to previous interface.
z
Initialization: it is to initialize the disk. Disk initialization is going to remove all data in current
disk. So, do not use it causally unless there is a must.
z
Detail information: You can click it to view more detail information in a new interface. Click
return button you can go back to Figure 3-21.
Figure 3-22
3.4.1.2 Add hot spare disk
In Figure 3-21, click add hot swap disk button, you can see an interface is shown as in Figure
3-23.
Here you can view idle disk list. You can click the select button to select the hot spare disk. Then
you can click save button to exit.
Please note one device can max have four hot spare disks.
Figure 3-23
3.4.1.3
Remove hot spare disk
In Figure 3-21, click remove hot spare disk button, you can see an interface is shown as in
Figure 3-24.