Dahua ESS3016X, Руководство пользователя

Страница: 10 / 85

ESS3016X User’s Manual
10
You can refer to the following sheet for detailed information.
SN Port Function
1 Power indication light It is to display power working status. It becomes red
when alarm occurs. It becomes green when system is
working normally.
2 Power fan It is to help ventilation.
3 Power socket Connect to 100--240V AC.
4 Data channel connected to
the host Connect it to the host.
5 COM Output alarm information.
NO1 C1 NC1
：
HDD power channel alarm output
NO2 C2 NC2
：
Fan alarm output
NO3 C3 NC3
：
Redundancy power alarm output
NO4 C4 NC4: System alarm output(Including the above
three alarms)
6 Alarm relay output
NO: normal open
NC: normal close
C: public port
AB RS485 alarm output. G: ground end.
Note
Use special 1000M cable if your environment is 1000M.
1.2.5 Boot up and Shut down
1.2.5.1 ESS3016X
Please follow the steps listed below to boot up the device. See Figure 1-4.
z
Connect the power cable to the system.
z
Click the device power button to boot up the system. You can see power indication light
becomes yellow and all channel read-write indication lights flashed once. Now the boot up
completed.
If it is your first time to boot up system, you need to set network operation system
manually.
Figure 1-4
SN Name Function
1 Power Alarm If there is error in one of the three alarm sockets, the light becomes red.
2 Fan If there is alarm from the system fan, the light becomes red.
3 Temperature If there is alarm from the system temperature, the light becomes red.