37
2.5.2.1 Configuring Camera Attributes
You can adjust the brightness, contrast, saturation of the video image, and set shutter parameters to
get clear videos and recordings that you want.
2.5.2.1.1 General
This section provides guidance on configuring parameters such as image brightness, contrast,
saturation, and hue.
Step 1
Select
Setting
>
Camera
>
Attribute
>
General
.
Figure 2-49 General settings
Step 2
Configure parameters.
Table 2-17 General parameters description
Parameter
Description
Brightness
Adjust the overall image brightness. Change the value when the image is too
bright or too dark.
The bright and dark areas will have equal changes. The image becomes blurry
when the value is too high. The recommended value is from 40 to 60. The range
is from 0 to 100.
It is 50 by default. The higher the value is, the brighter the image becomes.
Contrast
Change the value when the image brightness is proper but contrast is not
enough.
●
If the value is too big, the dark area is likely to become darker, and the
bright area is likely to be overexposed.
●
The picture might be blurry if the value is set too small. The recommended
value is from 40 to 60, and the range is from 0 to 100.
It is 50 by default. The higher the value is, the more obvious the contrast
between the bright area, and dark area will become.
Saturation
Adjust the color vividness, and will not influence the image overall brightness.
●
The image becomes too flamboyant if the value is too big.
●
The image is not flamboyant enough if the value is too small. The
recommended value is from 40 to 60, and the range is from 0 to 100.
It is 50 by default. The higher the value is, the more flamboyant the image
becomes.
