9
Figure 2-9 Basic parameter
Step 3
Click
Drawing
to see whether the video image is properly zoomed, and focused by
checking the plate pixel.
Figure 2-10 Drawing
1) Drag zoom, and focus bar to adjust the video image until the image is clear.
2) Follow the tips on the figure on the right side, draw the capture area of entering
vehicles.
3) Click
Add
next to
Shield Area
to draw areas where the Camera does not recognize.
Click
Delete
to delete the area.
4)
Realtime Display
window in the middle displays the plate recognition result cutout at
the upper-left corner and vehicle image in real-time.
5) Click
Save
.
Step 4
Click
Finish
, and then click
Finish
in the middle to exit the
Guide
page.
You can always click
Back
to go back to the last step during the guide.
2.3 Live
Click the
Live
tab.
