User’s Manual
68
1. On the
TEL NUM
submenu, press
to enter the screen from where you can
select a telephone number that you want to program by pressing
and
.
2. After selecting a telephone number, press
to enter the programming mode.
3. Configure the telephone number settings, and perform other operations.
Table 7-18 Telephone number setting
Item
Setting
STATE
●
ACTIVE
: Allow the telephone number to be linked.
●
ISOLATE
: The telephone number is programmed but temporarily not
used.
STOP CYCLE
●
YES
: When the alarm event occurs, if the event is programmed to link
multiple telephone numbers, press # key on your telephone to hang up
the call, the calling will not link to other telephone numbers.
●
NO
: When the alarm event occurs, if the event is programmed to link
multiple telephone numbers, press # key on your telephone to hang up
the call, the calling will continue to call other telephone numbers.
◇
Press
+ 2 (F2) to enter the
EDITING
mode for changing the telephone
number. You can enter up to a maximum of 24 digits. Use the horizontal cursor
keys to move within the number. Any of the digits can be overwritten. By
positioning at any point in the number (for example, at the start) and holding
down, it is possible to delete all the digits from that point onwards (for example,
deletion of the entire number).
◇
Press
+ 3 (F3) to do a test call on this number.
◇
Press
+ 4 (F4) to interrupt the call in progress at any time.
4. Press
to return to the telephone selection menu. Then you can continue with
programming other telephone numbers, or press
to return to the
TEL NUM
menu from where you can press
and
to move to the next menu.
●
SMS NUM
1. On the
SMS NUM
submenu, press
to enter the screen from where you can
select a SMS number that you want to program by pressing
and
.
2. After selecting a SMS number, press
to enter the programming mode.
3. Configure the SMS number settings, and perform other operations.
Table 7-19 SMS number setting
Submenu
Setting
STATE
●
ACTIVE
: Allow the SMS number to be linked.
●
ISOLATE
: The SMS number is programmed but temporarily not
used.
SYSTEM
Press 1 to 7 to select the day of the week when user wants to receive
an automatic SMS text about system status.
CREDIT
Press 1 to 7 to select the day of the week when user wants to receive
an automatic SMS text about pre-paid SIM credit.
SMS TIME
Enter the specific time when user wants to receive SMS text for
SYSTEM
status and/or
CREDIT SIM
.
Содержание DHI-ARC3008C
