Dahua DHI-ARC3008C, Руководство пользователя

Страница: 50 / 137

User’s Manual
39
Step 2 Press and to select which keypad you want to program, and then press to
enter the programming mode.
By pressing + 2, you can enter the
EDITING
mode for changing the description of
keypad.
Step 3 Configure the parameters for the selected keypad.
Press
and to alter the options. Press to confirm the setting and move to the
next submenu.
Table 7-1 Keypads programming settings
Submenu Setting
STATE
●
ACTIVE : The keypad is operating.
●
ISOLATE : The keypad is currently out of service. For example, when the
keypad has technical problems or needs maintenance.
AREA
●
Establish on which areas each keypad can control. Area 1 to area 8 can
be assigned individually or in combination.
●
To assign or remove areas from the keypad, press the corresponding key
(1 to 8) and then press . The number of the assigned area appears on
the programming line to confirm that the selection was successful. The
number of the assigned area disappears from the programming line to
confirm that the selection was cancelled.
SHOW
Select which areas (except those not assigned) status can be shown on the
LCD display. This function is used to display the status of the areas without
actually carrying out any operations on them.
EVENTS
●
Select which areas the alarm events (panic, robbery, fire, medical, and
duress) are sent to by pressing the corresponding key.
●
Duress can be sent by direct key or entry of the duress code. If no area is
selected, the events described above cannot be activated.
●
To assign or remove areas from the keypad, press the corresponding key
(1 to 8) and then press . The number of the assigned area appears on
the programming line to confirm that the selection was successful. The
number of the assigned area disappears from the programming line to
confirm that the selection was cancelled.
TAMPER
●
Determines to which areas the tampering with the displayed keypad
(opening of the case of anti-breach materials) must be sent.
●
If no area is assigned, tampering with the keypad will not activate any
acoustic alarm.
●
To assign or remove areas from the keypad, press the corresponding key
(1 to 8) and then press . The number of the assigned area appears on
the programming line to confirm that the selection was successful. The
number of the assigned area disappears from the programming line to
confirm that the selection was cancelled.