Dahua DH-WM4700-O, Руководство пользователя

Страница: 13 / 88

User’s Manual
7
3
Configuration and Management
Device Connection 3.1
Before configuration, connect the Router and the PC with the network cable or Wi-Fi. See
Figure 3-1.

Connect with network cable:
Connect one end of the network cable to the Local Network (LAN) port of the Router, and
another end of the network cable to the Ethernet port of the PC.
 Connect with Wi-Fi:
The default SSID of the Router is "Dahua Wireless", and password is not required.
Device connection Figure 3-1
Login 3.2
Before you configure the Router, make sure that:

The Router is connected to the PC.

The network of the PC is set to automatic access mode.
Open the browser, enter IP address of the Router (the default IP is 192.168.1.110) and Step 1
then press Enter key.
Enter the login account and password. Step 2

The account is admin and password is admin by default.
 It is recommended to change the user name and password after first login.

The password must consist of 8 to 32 non-blank characters and contain at least
two types of characters among upper case, lower case, number, and special
character (excluding ' " ; : &).
 You can also reset password in Administratio > Management , refer to 3.12.1.1
Router Password.