Dahua 5.8GHz Wireless AP/CPE User Manual
- 36 -
Figure 28
1. Wired connection for two bck-to-back devices
2. Downlinked client device is set as access point, uplinked central AP device is set as client
3. Refer to 11.1 and 11.2 for detailed configuration
4. Expected Result: After the connection between access point and client, the computer which
connected access point and client can be interpinged, meanwhile, you can see the number of
connections is N on the page of status display for access point. (N means the number of connected
client)
11.4 Route Mode Networking
When TurboBridg5A is working under route mode, it is used as a router, see Figure 29 for more
information, the POE port of POE power supplier connects PFM88X, the LAN port of POE power
supplier connects external network, the LAN port of PFM88X connects computer, the exact
configuration is shown as follows:
