Dahua 5.8GHz Wireless AP/CPE User Manual
- 35 -
2. Wireless page -> set wilreless mode as access point and client respectively, both AP and client are
set as the same SSID, set the same way of encryption and password for wireless encryption, like
WPA->WPA2->CCMP->1234567890, it is recommended to finish configuration according to device
wizard;
3. Attention: Relative direction needs to be adjusted for access point and client.
4. Use one computer to ping another one, which means inputting ping xxx.xxx.xxx.xxx (IP of another
computer) in one computer;
Expected Result: After the connection between access point and client, the computer which
connected access point and client can be interpinged, meanwhile, you can see the number of
connections is N on the page of status display for access point. (N means the number of connected
client)
11.3 Wireless Coverage Blind Angle Adjustment Mode
When the monitoring point is blocked seriously, we generally adopt two CPE back-to-back
connection to adjust angle during the direct communication between client wireless and central AP,
see Figure 28 for more information.
