Dahua 5.8GHz Wireless AP/CPE User Manual
- 38 -
10 to set the parameters of DHCPD.
4. The network name of wireless connection is the WiFi network you set in advance, after the
computer is connected to PFM88X, the WAN port address of ping PFM88X, for example, the WAN
port IP of ping PFM88X is 192.168.2.50, then you just input ping 192.168.2.50
；
Expected result: The computer which is connected to the LAN port of TurboBridg2 can ping through
the WAN port IP of PFM88X.
Expected result: the computer which is connected to LAN port of TurboBridg2 can ping through
WAN port IP of PFM88x.
12. FAQ
1. The device can
’t boot up normally:
(1). The network cable between CPE device and POE module is over 40m.
(2). The quality of network cable didn
’t meet the standard of UTP-5 categories.
(3) The crystal head of network cable is insecure or cable sequence error (remake the crystal head)
2. Forgot IP address and unable to restore factory default
Please press Reset button for 5-10 seconds, try to input 192.168.1.36 IP to log in the device after all the
LED lights are on.
3. Why can
’t fine wireless access point in my computer?
Solution: wireless system is connected with max working rate, the exact rate depends on distance and
