Dahua 5.8GHz Wireless AP/CPE User Manual
- 32 -
Telnet:
When telnet is enabled, the command prompt window under Windows XP or Windows 7
adopts Telnet xxx.xxx.xxx.xxx (PFM88X’s IP) which can log in PFM88X. It is unable to log in the
device if Telnet is forbidden.
DHCPD:
PFM88X can be used a DHCP server when enabling DHCPD function, the DHCP client
which is connected to it can obtain relevant address from it.
Start IP and End IP: The IP address obtained by address pool and DHCP client can be only set
between start IP and end IP, which are usually set the same segment with PFM88X.
Subnet Mask: Set subnet mask according to the IP of set address pool.
Route: It is the gateway address; user can set corresponding parameter according to what function
he wants to realize.
WIN: Generally it is ok for user to set the same as route if there is no special requirement.
DNS1,DNS2,DNS3
：
User can set according to his demand; generally it is ok to set the address of
local DNS server.
Syslog:
Enable Syslog function, and at the same time set the IP of the PC where Syslog server is
located, server port is set as 514, then you can see the relevant log information on the Syslog
server.
NTP Client:
PFM 88X can log on the Internet when NTP client function is enabled, and set the
network address where NTP server is located, PFM88X will auto calibrate the set time from NTP
server and display it on the status display page.
SNMP Agency:
SNMP agency allows network administrator to monitor network performance,
search and solve network problems. Such as SNMP agency option enabled, fill in the name of a
user in SNMP community, such as dahua, then fil
l in user’s corresponding mailbox:
, fill in creatcomm for location information, then save and apply. Install mrtg on
the host, open mrtg webpage, then information like the flow which passes PFM88X can be
pbserved.
