41
Parameter
Description
Local Time
Display current system time of DH-PFM888S-AC.
NTP Client
Through network time protocol, DH-PFM888S-AC and time server realize
time synchronization. After this function is enabled, please fill in address of
proper time server according to needs, such as 118.103.146.184. At this
time, LAN port of DH-PFM888S-AC shall be connected to public network,
and configured with correct IP address and gateway.
NTP Server IP
IP address of designated NTP server.
NTP Server
Through network time protocol, network access point/client and
DH-PFM888S-AC realize time synchronization.
Time Settings
System time is a very important parameter of DH-PFM888S-AC system,
because NTP service of AP/STA, DHCP lease and system log need to use
system time. It is suggested that time settings should be modified
according to needs when logging in DH-PFM888S-AC for the first time.
Table 4-9
Click
“Save”.
Step 3
4.6.1.3 Interface Settings
Set the interface of the device.
In the navigation bar,
select “System Settings > Basic Settings”.
Step 1
Click
“Interface Settings” tab.
Step 2
The system displays “Interface Settings” interface, as shown in Figure 4-41.
Figure 4-41
Parameter
Description
Network Mode
Select
“Route Mode” or “Bridge Mode” according to needs.
