18
Parameter
Description
MAC Address
Wired MAC address of access point or client device.
Soft. Version
Software version of access point or client device.
Run Time
Run time after access point or client device goes online.
Group
Group name of access point device.
On the right of the list, select “More > Edit” to modify configuration info.
Template
Template name simultaneously issued to access point and associated
client.
Configure the template in “Advanced > Template”.
Wireless
Service
Radio frequency switch of access point device. If it is turned off, radio
frequency of access point device will be turned off, subordinate client
device will disconnect and go offline. It will enter client retrieval mode after
10 minutes.
Wireless Mode
Click “Display” on the right of access point or client, to display “Wireless
Mode” column.
Wireless mode of access point includes AP and AP+WDS.
Wireless mode of client includes STA and STA+WDS.
Location
Location of access point or client
Click in the left of access point; display info about client device under
access point device, including state, device name, IP address, MAC
address, software version, run time, signal intensity, connection rate and
location.
Connection rate means sending and receiving rate of client device.
Signal intensity means signal intensity of client device during connection
with access point device.
Table 4-3
4.3.2 Delete Device
To delete offline access point or client,
select “More > Delete” after the device, to delete it.
In case that many offline devices shall be deleted, click “Delete Offline Device” button
directly, to delete all offline devices at the same time.
Only offline devices can be deleted. If there are clients under the offline access point device,
delete the offline clients first, and then delete offline access point device.
