DAF 95XF Скачать руководство пользователя страница 101

Страница: 101 / 312

series

Removal and installation

CAB HEATING

4-3

11. Remove the frame at the front of the central

console, including the vents. To that end,
slightly lift the dashboard panel enabling the
frame to be removed more easily.

12. Remove the frame at the top of the central

console. To that end, slightly lift the
dashboard panel enabling the frame to be
removed more easily.

K100404

13. Remove the attachment bolts of the heating

unit in the cab floor.

14. Remove the attachment bolts of the heating

unit at the front of the cab (underneath the
grille) To do so, remove the interior filter
housing.

15. Remove the coolant pipe at the front of the

cab (underneath the grille). Plug the
connections on the heater in such a way
that no coolant can leak from the heater
when it is removed.

K100406

16. Remove the connector on the side of the

central cabinet.

17. Remove the heating unit.

K100408

ᓻ

0209

Содержание 95XF

























































































































































































































































































































Результаты поиска

Содержание 95XF

Отзывы:

DAF 95XF, Руководство пользователя, Страница: 101 / 312

Результаты поиска

Содержание 95XF

Отзывы: