background image

•  If the power cable is damaged, it should only be replaced by the   

manufacturer or a suitable qualified after-sales-service in order to 

avoid a hazard

•  Do not allow the mains cable to hang over sharp edges or come in 

contact with hot surfaces.

•  Allow the unit to cool before storage.

•  Before cleaning, disconnect the appliance from the mains supply and 

allow to cool.

•  This appliance is intended for household use only and should not be 

used for industrial purposes.

•  Do not use any accessories or attachments with this appliance other 

than those supplied or recommended by supplier.

•  Do not use this appliance for anything other than its intended use.

•  Do not push objects into any openings as damage to the appliance 

and/or electric shock may occur.

•  Unplug after each use. Grasp the plug, not the cord.

•  Do not pull or carry the Vacuum Cleaner by the electrical cord, use the 

handles provided.

• 

Ensure fingers and other objects are never placed in any part of the 

vacuum cleaner. Clothing or hair may become trapped if the vacuum 

is used improperly.

• 

Keep hair, loose clothing, jewellery, fingers and all parts of the body 

away from openings and moving parts.

•  Keep all air vents clear and free of dust, lint, hair and anything else 

that may reduce airflow.

• 

Avoid directing the appliance towards naked flames as the air         

discharged may extinguish gas fires or pilot lights and may disturb 

ashes in open fires.

Tornado F1 Upright Vacuum

FLR00049

User Manual

Содержание TORNADO F1






















Отзывы: